Tickover
Feedback

Maintenance that manages itself

You fix it.Tickover runs the rest.

Maintenance that documents itself. Your team talks about the job the way they already do, and Tickover listens, writes the record and remembers every breakdown and every fix. When something stops, the right person arrives with a plan built from what worked last time. No forms. No new app.

See it in
Works overWhatsAppPhone callSlackEmailSMS
What people say
Priya
Priya09:12
Conveyor 2 just stopped. Need someone.
Tickover09:12
Ravi, Conveyor 2 has stopped. Start with the drive-side roller. Plan attached.
Ravi
Ravi09:15
On it.
26 min laterthe fix is done
Ravi
Ravi09:41
Running again. It was the roller.
Tickover09:43
Had the lock nut backed off again?
Ravi
Ravi09:44
0:06“Yes, right off. Fitted a new one.”
Conveyor 2 · stopped
Listening
Plan for Ravi
  1. 1Check the drive-side tension roller2 Nov job
  2. 2Bring a 13 mm spanner and a lock nutRaviRavi
  3. 3Spare roller TR-220 is in bay 3SunilSunil
What happened

Stopped around 09:08 ±4 min. Priya reported it at 09:12. Ravi was on it by 09:15 and had it running again at 09:41. The drive-side tension roller had worked loose because its lock nut backed off. New nut fitted.

Remembered. Third time this lock nut has backed off. Added to Friday’s service.
Approve
EditMohanMohan09:52
Tickover in 30 seconds00:30
01 · The problem

The person who knowswhat happened hastheir hands full.

So what they learned never gets written down. The job closes as “fixed”, the cause is a guess from a dropdown, and the next time it breaks, whoever turns up starts from zero.

Most teams already have maintenance software. The work still happens outside it.

The repair gets done. The record does not. It lives in a WhatsApp group, a phone call and somebody's memory, and the software only knows what someone found time to type in later.

0%

use maintenance software

0%

say the whole team uses it, every time

0%

say people were never properly trained on it

0%

were asked for something that was already in it

Of 686 maintenance and operations professionals surveyed. Limble, 2026 State of Maintenance, as reported by Plant Services and Manufacturing Dive.

The same breakdown, again.

Nobody can see it is the third time, so it gets diagnosed from scratch, again.

Spare parts by guesswork.

You stock what you remember running out of, not what actually fails.

Servicing by the calendar.

Machines get attention on a schedule, whether they need it or not.

Nobody can type with a spanner in their hand.

02 · How it works

Every job starts with a plan.And leaves one behind.

Nothing to install, nothing to learn. It starts with whatever your people already do when something stops, and it gets sharper with every fix.

Someone says something.

A message, a voice note, a phone call, or a scan of the sticker on the machine. A few words is enough to open the job.

Priya
Priya09:12
Oven 3 isn't heating.
Call to the site number0:42
Oven 3, understood. Whole oven or one zone?
Scanned on Oven 3
asset filled in
Job opened09:12

Nobody opened an app. Nobody started from zero.

03 · It listens

Talk it through.The record writes itself.

Tickover listens to the conversation people are already having about the job, and turns it into the record: what broke, why, what fixed it and what was used. People talk like they always do. Tickover keeps the notes.

Every word, as it is said.
On a call, in a voice note, or standing next to it. The words appear while people talk, nothing to type.
Any language, or a mix.
English, Hindi, Marathi, or all three in one sentence. Names and part numbers it misheard get corrected from context.
Who said what.
Voices are told apart, so the first report and the fix land in the right place.
The recording stays with the job.
Anyone can play it back later. Tap a line and hear exactly how it was said.
Listening00:00RaviMohan
    Job record#2241
    —
    04 · Memory

    What your team knows, readythe moment something stops.

    No new app. People talk the way they already do, on WhatsApp, on a call, on Slack. Tickover keeps what matters as your site's memory, and turns it into a short plan the moment something stops.

    Said, anywhere
    RaviRavi2 Nov“Lock nut had backed off again.”
    PriyaPriya14 Sep“Belt keeps drifting to the left.”
    MohanMohan3 Aug“Tensioning procedure is on page 14.”
    SunilSunilMon“Two TR-220 rollers in bay 3.”
    Conveyor 2 · memory
    Lock nut on the drive-side roller backs offRaviRavi · 2 Nov
    Belt drifts left when tension is lowPriyaPriya · 14 Sep
    Tension to the mark, manual page 14MohanMohan · 3 Aug
    Spare roller TR-220, two in bay 3SunilSunil · Mon
    stays at your site
    Plan for RaviStopped09:12
    1. 1
      Start at the drive-side roller. Check the lock nut.Ravifrom Ravi
    2. 2
      If the belt has drifted left, tension is low.Priyafrom Priya
    3. 3
      Re-tension to the mark. Manual, page 14.Mohanfrom Mohan
    4. 4
      If the roller is worn, a spare is in bay 3.Sunilfrom Sunil
    Sent toRaviRavilock off first

    It talks to each person in the language they use with it, keeps to shifts and quiet hours, and never asks two people the same question. Anything it wrote, you can correct. Your correction becomes a plain rule you can read, or switch off.

    05 · Your team

    Everyone keeps their job.Nobody keeps the paperwork.

    Today

    Shouts, calls or messages a supervisor, then waits.

    With Tickover

    Sends one message. Is never asked for more than a few words.

    Priya
    Priya13:20
    Packer 4 is making a noise.
    Tickover
    Noted. Ravi has been told.
    that was all
    06 · Trust

    It earns its independence,one approval at a time.

    Tickover starts by suggesting. It only does more on its own after you have approved the same kind of thing again and again, and you can pull it back with one tap.

    Tickover

    Notices, and suggests.

    You

    Decide everything, as before.

    Pump 4 has failed three times since its last service. Bring the next one forward?
    How a level is earned

    It asks. It never promotes itself.

    Safety is never assumed.

    Whether a machine is locked off and safe to touch is always confirmed by a person, by name, every time.

    Every action has a name on it.

    What it saw, what it did, and who approved it, kept in a log nobody can rewrite.

    It only chases what you choose.

    Nobody gets a follow-up until someone taps Chase on that job. Everything else stays quietly on record.

    Undo is one tap.

    Or one plain sentence, from whichever app you happen to be in.

    07 · Where it is going

    Maintenance thatmanages itself.

    That is the destination: a system that plans, orders, schedules and closes on its own, so your team's whole day is the physical work. It gets there one earned step at a time, and you decide how far.

    A day on autopilot

    example day
    1. 06:00

      Pump 4 service moved into a quiet hour

    2. 09:12

      Conveyor 2 job opened, Ravi sent with a plan

    3. 09:14
      Ravi

      Locked off the conveyor

      confirmed by a person

    4. 09:15–09:41
      Ravi

      Fixed Conveyor 2

    5. 09:44

      Record written and filed

    6. 11:30

      Roller TR-220 reordered before stock ran out

    7. 18:00

      Week's summary sent

    Plans the work

    Builds each person's day around what is due and what just broke.

    Draft

    Orders the parts

    Sees what a job will need and has it waiting, within the spend you allow.

    Bounded

    Schedules the services

    Moves upkeep to when a machine actually needs it, in a quiet hour.

    Notify

    Closes the job

    Writes it up, files it, and learns from it.

    Autopilot

    Example of a site partway there. Each ability is earned separately.

    Safety is always confirmed by a person. Autopilot never changes that.

    08 · Fits in

    It works on top ofwhatever you use today.

    Tickover sits on top of whatever you use today and writes clean records back into it. If that is a spreadsheet, a spreadsheet is fine. Nothing to migrate. Nobody to retrain.

    Tickover
    Conveyor 2 · tension roller
    Oven 3 · thermostat contact
    Pump 4 · bearing
    Your maintenance system
    SAP, Maximo and the like
    A spreadsheet
    CSV in, CSV out
    Stock and purchasing
    reads stock, drafts requests
    Reports
    your data, in plain tables

    What you already use

    Sensors welcome. Never required.

    If your machines already report data, it can open a job or pin down a start time. It never closes a job, and it never overrules a person.

    Start where it hurts.

    One site, one team, one phone number. Add the rest when the records speak for themselves.

    The same idea, at any size.

    A small teamWhatsApp, paper and memory.Tickover becomes the system. Nothing else to buy or set up.
    A growing teamSome software, and plenty of work that never reaches it.Tickover catches the work that happens outside it and fills the gaps.
    A large operationSAP or Maximo, and a dozen other systems.Tickover sits in front of them. People talk; the system of record gets clean entries.
    09 · Straight answers

    The questionswe would ask too.

    • No. They message, call or scan a sticker with the phone they already have. The only screen is for whoever approves the records, and that runs in a browser.

    10 · Start

    Let the workdo the talking.

    Start with one site, one team and the phone number everyone already calls. Tickover learns the rest as you work.